This is my first Version of a Grinding Bed for my Ultimaker Dremel 400 Grinding Head and Holder.
I will improve this a bit more, because the PCB is just placed in there, and i may eventually pop out or not fit.
This was just a quick first version to make some tests with my new head.
working but needs improvement.
pcb-machine.h contains the settings i used for pcbgcode
Add some clamp stuff to fix the PCB better
I took a peace of wood 200x200x10mm , drilled a big hole in the mid, so i can pop out the PCB without any problem.
I also drilled on the edges, so i can just use the bulldog clamps.
So i just have to remove the mirror from my heated, and clamp on the wood. And start grinding.