MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Planetary gear - engrenage planétaire

by NOP21 Apr 18, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

It all printed except pignon_soleil it only printed the bottom half. Downloaded it 5 times and sliced it the same and each time it only printed less then half of the pignon. The only problem. Any suggestions as to why it did not print all of the part.

The file is broken....

non, les fichiers sont ok

Very Nice, what's the ratio

sun gear = 25 dts
satellite gear = 20 dts
crown gear = 65 dts

En première page c'est encore mieux, c'est le critère de recherche le ratio ;)
Joli design, super print, super vidéo, GG

Bonjour NOP21.

A very nice design!

It would be nice to include a bill of materials for others, to make it easier.

For those wanting to print this, you will need 7 of the small washers, 1 medium washer and 1 big washer, 8 circlips and 3 planetary gears. the rest of the parts are 1 each.

Also to note, the gear teeth are a very tight fit. it might be nice to include a gear set with a bit more clearance for those of us who don't have a premium printer.

Other than that, great job!

I found it tight as well, but when removed two of three clips holding the planetary gears in place, it moved much better. The extra clips are overkill on a demo item like this one, anyway.

Une photo, une photo

Hello, right, but I make a little call to your intelligences to look a little how it works. The game is enough for me, after a while, everything rode and works well.

great project! However, your parts list does not have the fixture for holding the planet gears. Made one myself, but just for reference.

Je vais vérifier et corriger
grand merci