MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Here is my WIP E3D Aero layer cooling solution. This requires a 50mm radial fan, 2x m3x20 and 1x m3x35 bolt ( links below ).
Note: For FT5 users, make sure you have clearance for homing on the right side. If not, add a spacer to contact the switch earlier. I may move it closer to the gear in future revs but that will only gain a couple mm at most.
UPDATE ( 5/31/2017)
Added BL Touch Mount
UPDATE ( 5/4/2017):
Added Volcano version ( 360, right mount). Its untested, feedback would be great.
UPDATE ( 4/13/2017):
360 degree version! ( standard right & left mount and mirrored right mount for Trinus users)
Added front nozzle version for front-to-back heater blocks.
Added mirrored version for side nozzle. (NOTE! Mirrored is NOT a left hand version. Its for the literally mirrored Titan/Aero combo sold by E3D)
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.