Magnetic, filament-fused Mi Band 2 replacement wrist band
Unfortunatly my original MiBand wristband just broke. I always wanted a band that looked more like that of a metal watch. So this is my replacement design.
What you need
- Raw bits of 1.75mm filament
- 4 magnets (6mm diameter x 3mm)
Post your I Made One if you did.
Have fun printing | running | fusing | timeing | monitoring
Connect as many links as you need to the ends of the shell. Stick small bits of raw filaments into the holes. Then connect the two magnetic endparts.
I heated up a thick needle with a lighter and poked in each end of the raw filament. By doing this the ends of the filament bit expanded and it couldn't fall out anymore.
Last but not least glue two magnets in each endpart
The individual links are fused together with raw bits of 1.75mm filament