Simple stackable box
Box with 3 compartments and a sliding cover, primarily designed to hold threading taps.
Each box can stack on top of another box by sliding it on instead of box cover.
Tolerances were designed so it fits together tightly.
It may be a bit too tight the first time you assemble it, but later on it will slightly lose it's grip and there should be just enough friction left so that cover doesn't fall off by itself.
Happy 3D printing. :D
(W x L x H):
39.2mm x 72.4mm x 16.0mm
No special needs to print this item. Use your printer default settings.
I used ordinary PLA, first layer was printed at 215°C with fan turned off, the rest was printed at 205°C with fan cooling at 100%.