I have printed the Fluke hanging tool by Thorius.
And I needed a way to hang the meter on a metal surface.
So I created this little thing.
You will need to buy 2 magnets ø25x7mm the kind i use is shielded magnets but any kind will do.
You will also need to get some kind of rubber/glue to fill the six holes around the magnets to create a anti sliding feature.
This is to make sure the magnets will not slide down when the meter is hanging on a vertical painted surface.
The holes needs to be overfilled a little to make sure the rubber will be squeezed against the surface by the force of the magnets.
I use a piece of double sided Velcro to connect the hanging tool and the magnet.
I printed it at 40mm/s speed
My print is a press fit with the magnets so i didn't have to glue in the magnets
Depended on you printer and the magnets you buy you might need to glue the magnets in place.
Fill the six holes with the rubber/glue of your choice and let it dry.