This is a handy device for saving your palms when applying reconstitutable vials onto I.V. mini-bags. Especially useful in main pharmacy or satellite pharmacy I.V. hoods or any environment where you might be making dozens of bags on a daily basis. Quick and easy, you can align and securely affix vial to mini-bag with just the right amount of vertical downward force.
Increased opening for easier removal of mini-bag after vial attached.
You can print without any support, but some machines might do a better job with support enabled. There is a small overhang on the base as well as in the bearing slot in the handle. I would use 25% infill on the base and piston with several perimeters. The handle I would print solid. The HWD dimensions are 210x100x190. It should be printable on any 200x200 print bed if placed at an angle.
1 x M5 45mm bolt
1 x M5 25mm bolt
2 x M5 nut
2 x Ball Bearing 625 2RS 5x16x5