Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

mainframecn

Quadcopter MF110 Drone

by mainframecn Mar 15, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi mainframecn :)

I have a question.
How many total posts are used?

It was designed for 14, in the pictures I'm using 13 because of the receiver used.
10 posts on the outside and 4 close to the flightboard.

Thx to reply~ :)

If I wanted to run it with 3 in props how much do you think you would have to scale it up.

I don't think scaling will work, it will also scale up the mount points and the distances.

So, are you running them 3S? Would you share your PID's? I am flying mine with BF 3.2 canceled all the filters, soft mounted the FC. Lowered the P's and D's but still hot. Im using the same props as in your image above

I have the same motors running PC setup of more less the same frame(my own design) on 3S the get freaking hot is that what you're saying not safe?

Hi,

If your d-value is not too high and they get hot, don't use 3s. They are not rated for 3s. Sometimes you can get away with it, like low d-values and light props.

What's the weight like on your build/the frame alone?

Depends on the plastic really. Originally i printed it with ABS 3 mm and it came to a 42gram (only bottom and top plate) but found it too flexible on the motor mounts. Printing it with PETG-Carbon on 2mm was about the same weight, but a lot stiffer.

Yes, according to the product description they support 3s.
"Voltage: 7-13v (2/3s lipo)”

Thanks so thay will fit this frame and what size props would you say to use thanks

As it says in the description, i've used 3" props and cut them down to 2.7".

hi will 1306 3100kv motors fit with 3s battery thanks

It depends what motors you pick. Some are only 1-2s and some go up to 3 or even 4s.
If you have a link to the motors you want, perhaps I can check.

Hello...

I don't understand the files names....

The file called bottom plate has no place to screw the motors?

Normal?

Hello...

I don't understand the files names....

The file called bottom plate has no place to screw the motors?

Normal?

Somewhat as intended, these frame types can be used as push or pull drones. So bottom and top can be swapped.

OK. Thank you.

Do you know the payload?

I think my last setup is about 175 grams. These frames, even carbon frames are heavy.

What type of controller do you use?

I use a flysky i6x transmitter and fs-a8s receiver.

And thé doigt contrôler?

Sorry. Flight controllerr

Please read the description, the components are in there with links to banggood.