MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Scheme markers for Malifaux

by Festera521 Mar 11, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

I print these at 0.1mm layer thickness but they still don't turn out great. Maybe they're just too small+detailed?

I have had no problem with getting good prints with 0.15mm layer thickness.
Naturally its a question what you consider great, what I get is prints good enough to paint and look really nice on the board.
I play Arcanist myself so I only have the tome version at home but I can clearly make out the toad.
Its not so that I can paint the eyeballs but enough to make the legs clearly visable and paintable.
Most of them are very simple straight up prints so I cant really see what could cause large problems.

The arcanist lingering effect markers are much smaller and difficult to print and they all came out fine for me.

Arcanist lingering effects and temporary conditons

That is not very good, I agree.
its been a long while since I printed any of them.
As our neverborn player has his own 3D printer Im not sure I ever printed one of them.
I will try making one now.

Odd, I had no problem with my print.
This is on a Flash forge finder on high setting (0.15mm thickness) and 5% infill.
Its not perfect but its clearly visable what it is and should be easilly paintable.

OK cool. It could very likely be something I'm doing wrong since most of the time I'm wrestling with this printer. I did a Guild marker @ 0.2 and it was bad, so I tried Neverborn @ 0.1 to see if it made a difference and that's what I linked above.

How does the printer work when printing something else?
The top edge of the base seems to have some problems as well, it coule be as simple as the machine running too hot.
Sadly Im no expert on running a printer.
The Finder is a very simple plug-and-play printer and while it has had its issues It has worked far above my expectations.

Ahh it's making me crazy! I printed something similar with a tiny skull on it, and it comes out great... immediately try the Guild marker and blech...

I dont get why the immage does not get activated.
As far as I know I have done nothing different.