Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

DEL_1979

Angle Measuring Tool

by DEL_1979 Mar 1, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Comments deleted.

Nice iteration of the original... One down side I think is that the arms of the original appear much longer. I think size may limit usability. I also ended up printing one of the remixes it had measurement graduations on it.

The tool is not usable, in abutment ca exceeds

I just bought one of these off Ebay about 1 month ago and after receiving it I noticed that the plastic screw and nut is the weak point so I'm going to print 4 of these out just to have them when the originals kick the bucket.Thanks for the design......Doug

Love it, great Idea thanks mate :)

I just made these in PETG and find that the slot for the bolt to go through is a bit tight for a M4 bolt and also the hole in the knob is tight. I can drill them out some but it would be nice if this was adjusted slightly bigger.
I was going to scale to get the fit but the recessed slot where the bolt head rides in the bar is a good size so I didn't want to make it to big.

Now that I work with it a bit it is loosening up some so probably is ok.

Brilliant. Saw an ad minutes ago on fb. Thought, I could make one of those.. Better check if anyone beat me to it :)
Even better. Will make a copy! Thanks!

Just made one. Works great! Just to clarify M4 socket head screws are the correct ones to use. I tried M4 flat screws and they don't work well with the tracks. 10mm will work, but 12mm will gives you some extra thread grip. You can go longer, too. At about 20mm the screws will stick out the top of the nut holder.

Also, on my next print I'll scale up the nut holders to 101 or 102 percent in X and Y. I was able to smash them in but they were really tight.