MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Fan duct for Zonestar (dual extrusion)

by Mariesange Feb 26, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

I ran into a small problem with this part, but this is due to a modification that I have made. I have replaced my bronze print nozzles with hardened A2 print nozzles made by Micro Swiss. The threaded ends of the upgrade print nozzles are about 1mm longer than the original bronze ones, which in turn makes my print head about 1mm longer. When I did the upgrade I had to reset the Z home screw, but didn't think about it when I printed this part. My heater blocks actually push on the vent ring pretty hard. I simply need to make the part a little longer to make it work with my setup.
I just wanted to identify this as a potential problem so that other makers don't make the same mistake that I did.

What material you have used?

Hi, I used PLA

Ok thank you...I'm printing it

Can you test it and tell me what do you think about it?

Thanks that seems to improve cooling of the left extruder for me :)
The autolevel sensor did not fit with this, but I made a little spacer: http://www.thingiverse.com/thing:2211875

Zonestar p802 seperator for proximity sensor for Fan duct by Mariesange
by txxt

Thank you for your comment. I'm happy that my design was useful for you. I'm not sure about the improvement because I didn't print dual color part since this new fan duct.
For the sensor, yes I saw that and I wanted to design a spacer too. Thank you for the design, I will print it soon.