Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Tau34RUS

Fallout 4 Deathclaw

by Tau34RUS Feb 14, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

OK this model is beautiful and going to go in my personal collection. 100% size
Printing now with a .2mm nozzle at .1mm layer height -
est time: 3 days 10 hours and 48min on my modified CR-10S
Amazon Basics PLA 210c build plate 60c Ill post pics in a half a week

Comments deleted.

I reduced the size to 50%
Printing it now with support
Its at 64% finsihed. will report back when its done.

Good luck. Do not forget to share photos ;)

Hi,

I am using CURA and i was wondering what support settings people used to successfully print this with?

Did you use touching build plate or support everywhere?

-Thanks

So I used Cura as my slicer and ran into some fingers missing. Otherwise it looks great! Any idea why that may have happened? I don't know if it has to do with the auto supports generated by Cura.

If you scaled it below 100% to something like 50% they may be too small, though doing so with my settings doesn't seem to fail to generate them in the slicer. I have my supports set to Zig-zag and 70deg. If they aren't generated in the preview try under Experimental changing Slicing tolerance to Inclusive https://ultimaker.com/en/resources/52672-experimental

Because of small details you'd better not to scale it down

hopefully printing this tonight if i dont have too much trouble with mesh faults or anything like that, ill upload when its done for everyone to see and let you know if i had to change anything to make it print.

Let me know if i need to fix anything. For me it works like charm via Simplify3D, just few manual support adjustments were needed.