Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

AVall20

Anet A8 Ultimate Frame Stabilizer - HEX REMIX

by AVall20 Jan 31, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Do I have to print these verticaly?

Hello,
The version with the "Anet A8" logo does not have supports for the cutouts in the A,e,A, & 8 characters. I have modified them to include supports in the style of stencil letters, if you are interested (I am testing/printing now, but it should work fine).

Hi iam using repitierhost cura and my pices are 200mm high when done. Cant find anything about scale in here

There was no scaling needed for me. Cura shows 138.4 mm tall for me.

If you have Cura set to Prusa i3 printer you can click on the name, then click manage printers, then click machine settings, and you can edit the build plate size to the Anet A8's actual size. Which is:

X(Width): 220
Y(Depth): 220
Z(Height): 240

That will fit most builds on the platform but if it doesn't you can take the brim/skirt off by clicking custom, and scrolling down to build plate adhesion, and then click the drop down menu and select none, giving you maximum use of the stock build plate.

Works great. I printed both of them (without the logo), and both of them are not finished but it doesn't matter really.
For the right side I forgot support material and for the left side the support material wasn't dense enough to get a good line. So both of them are missing that "nose" but that only saved material.

Seems like the shrinkage for this big of a print is too much to get it to fit perfectly. My parts were about 1,5 mm too short, so I almost wanted to reprint them, but then I decided to use a piece of hard plastic to fill the gaps. After a bit of sanding and trying it out multiple times, i finally managed to squeeze everything in place and screw it together. Now it can probably withstand a small bomb.
Great piece and design, the problems with the length of the parts are probably my own fault.

If you have Cura set to Prusa i3 printer you can click on the name, then click manage printers, then click machine settings, and you can edit the build plate size to the Anet A8's actual size. Which is:

X(Width): 220
Y(Depth): 220
Z(Height): 240

That will fit most builds on the platform but if it doesn't you can take the brim/skirt off by clicking custom, and scrolling down to build plate adhesion, and then click the drop down menu and select none, giving you maximum use of the stock build plate.

Then the print will fit fine.

Anyone tried this with a mainboard case? Just wondering if I'll have the clearance.

I think someone made a remix of mine for that. My setup does not have the electronics or power supply in with the printer.

Nice work on this. Printed 2 sets for each of my a8's but I replaced the T corner brace with this but this does not have a slot for the rear brace to fit in so I'm actually getting more place than with this tiny t corner brace. Any chance you would be willing to add the slot or share the 3d file that you made?

I'm sorry this didn't meet your needs. You should have no problems taking my .stl file and remixing your own version as others have already done and as I did with the original. I used tinkercad to remix this. Feel free to do with it as you wish!

You can't even print this on this printer...Am I missing something? Psh...lame.

If you have Cura set to Prusa i3 printer you can click on the name, then click manage printers, then click machine settings, and you can edit the build plate size to the Anet A8's actual size. Which is:

X(Width): 220
Y(Depth): 220
Z(Height): 240

That will fit most builds on the platform but if it doesn't you can take the brim/skirt off by clicking custom, and scrolling down to build plate adhesion, and then click the drop down menu and select none, giving you maximum use of the stock build plate.

I believe so. This can certainly be printed on the A8. Flip on the side and orientate it so that it goes from corner to cover. There should be no problems fitting this on the stock bed.

If you have Cura set to Prusa i3 printer you can click on the name, then click manage printers, then click machine settings, and you can edit the build plate size to the Anet A8's actual size. Which is:

X(Width): 220
Y(Depth): 220
Z(Height): 240

That will fit most builds on the platform but if it doesn't you can take the brim/skirt off by clicking custom, and scrolling down to build plate adhesion, and then click the drop down menu and select none, giving you maximum use of the stock build plate.

I printed this and it also came out short. I made sure to set the scale to 100%. I thought "screw it" and hammered it onto my printer. I knew it was a bad idea and also my frame is cracked now. Don't be dumb like me.

Has anyone else had the issue where its 1.4mm short? Another person on the Anet Facebook page and I both had the brace come out 1.4mm short. I confirmed Cura did not auto scale prior to the print per the instructions. The other person printed 2 versions, and both were 1.4mm short.

I had the same problem, my part is ~1mm shorter :/
I've checked on Fusion 360, and Cura, and the file is at the correct dimensions, but when I print it it's shorter, I don't understand why Oo

yup same here, did you find the right scale?

Same here, any new experiences? I just printed it out.
I'll try to scale the height only, as the rest fits perfectly.

I've tried to print this, but am having problems with the internal surfaces of the hexagons, all the makes look awesome, but I've just upgraded to skynet and am getting a lot of droop and curled filament on the overhangs, causing the print to be quite weak, anyone got any tips on what settings I can adjust?

so will this help with the slight banding i get in some parts of my prints? (it's not z wobble btw)

Is there anyway to install this without needing to pull the printer apart?

You only need to remove top brackets. Put masking take on either side of the nuts so they stay in place when you remove the screws. You won't have any try to roll away and you should be able to screw it back in without any fuss.

Removing top brackets only took me a few minutes and went pretty easily. There is no way to install without removing something.

Thanks for those! They were ultra tight to install but the stiffness of the frame is great now!

Comments deleted.

Yes you can! Stand up on it's side and rotate, it will fit! If you look at the original, round hole version, he has a pic on how to orient it on your bed.

just a note: if you print these with PETG, scale them up by ~0.5%
they were completely loose for me :(

How did you consider the one with the text to be printed? The middle part of several letters ('A', '8') is just hovering in space, right? And one would need support to print this...

I think just carving 2mm instead of punching through the whole material would be enough.

I originally had supports for the "floating" pieces in the text. Looks like when I split and uploaded again, they disappeared.

I will fix them as soon as I can today. I'll also make a punched version as you suggested while I'm messing with it.

HipoxiK did a remix with raised letters. http://www.thingiverse.com/thing:2099154

Anet A8 Ultimate Frame Stabalizer - HEX REMIX
by HipoxiK

Ah, ok. No hurry, started printing the clean ones! Just was curious about the letters in the other version.
Thanks for the nice remix :-)

Hey, thanks for pointing out the supports are missing!

I too went with the clean version myself.

Double check your scaling. I keep seeing people on the forums having issues where their slicing programs are automatically shrinking the frames.

when i set them at 100% scale the total length of the part seems to be about 280mm yet the installation height is closer to 230mm..... am I doing something wrong or is all good?

Yes, total height of the frame should actually be around 274mm as it the stability pieces wrap around the curved edges of the frame making it more solid and secure.

The height between the top and bottom frame pieces should be about 234mm.

Does that make sense? Sounds like you should be all good to go as long as your scale is at 100%!

I like your design and would like to print it, but you have both left and right in a single stl. Can you split them in 2 files like your original version is? I can't print 2 at once.

Fixed and split the Anet A8 version and split the clean as well.

Thank you!

-removed-

Will this also fit the Tronxy P802M?

Thanks. That's really sad, because the two printers are so similar, yet so different.

No, different size frames.

Thanks. That's really sad, because the two printers are so similar, yet so different.

That's how I felt about my first printer (Tronxy)....

Will this also fit the A6 ?

I don't have the A6 but I believe the frames are different sizes.

Attention! If using CURA make sure to UNCHECK the option "Scale large objects" found in Settings>General>Opening>Scale large objects

Failure to do so will result in a piece that is 2 inches shorter and a EPIC WASTE of time and filament. I learned the hard way so you don't have to ):

I can't find this option anywhere in the preferences, machine options, or expert settings.

Updated on the Thing Details. Thank you, I did not even know that was an option. I'm sorry about your useless part. :(

Nice design with the hexagon. I couldn't wait for your 'Anet A8' labelled version so remixed my own ;).

Still, looking forward to see what you come up with.

... now my printer carries your name, great. Is that really necessary?

Sorry, it's actually not my name. That is from the original person that created it. I can upload a new "clean" version if anyone wants it. I'm also working on another version with the "Anet" on one frame and "A8" on the other.

yeah, in my opinion a clean version would be nice. Why not both versions?

I'll upload a clean tonight and I'll hopefully have my "Anet A8" version done as well. I'll make that a clean one too.

Clean is up, still working on the Anet A8 added text version.

Thanks, I like your design. I have it in use for some prints, now.

My build area is slightly to small for these to print.. do you have any idea how to make them fit? Or do you just need a bigger glass bed?
Cheers

These should just fit diagonally on the stock Anet A8 bed @ 220mm x 220mm. Make sure your slicer has the correct dimensions for your bed entered. I believe Cura defaulted mine at 200mm x 200mm.

Ok I'll have a look tomorrow.. so you are going to print them with support all the way underneath this thing? This is going to be a rough surface. But there is probably no other way. Thanks by the way!

Check out the original and how they printed it. (first pic) http://www.thingiverse.com/thing:2069466

Print on its side and you shouldn't need any supports or rafts if your printer is calibrated well. Maybe that's why it wasn't fitting in your slicing program?

Anet A8 ultimate frame stabilizer
by 3r4th

Thank you for your remake :) now I can save the time for other things because I thougt about making a hex version!

All the credit goes to you and your good work!