To make this model, I started with 2 other models I found, a UF logo and an alligator. I modified the alligator quite a bit, as it's mouth was not open far enough to accommodate the logo as large as I wanted it. Edited and chopped up in Mesh Mixer. One of the main goals here was to make the UF logo bit enough to paint, and I think I accomplished that.
The length of this print is about 22 inches. Perfect for painting!
I highly recommend many 0 distance skirt layers, or a raft, to help prevent warping.
Original gator was made by mraiser
Original UF logo was made by bgriff33