MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Adjustable tablet holder for DJI Mavic PRO

by smsagent Jan 6, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

hi bro nice work ''slide stl'' file missing

Hi, thanks!
I can see the slide.stl part, nothing is missing here :-/
Please try again.


I have a problem with the ground plate. It does not really fit on the controller of the Mavic 2. It seems that the Mavic 2 controller is a little bit taller in the height. Would it be possible to get the original 3D part as step-file, so that i can edit it in my design software "PTC Creo"?

I had the same problem, the base is a little tighten so I used abrasive paper to finetune it.
As I am not the maker of the base you need to ask the creator for the source: https://www.thingiverse.com/kundali

Regards and happy printing!

Thanks for your help!

Any chance of getting this sized down a bit to fit a Note 4 in an Otter Box case?

Here are the dimensions:

86mm Wide
14mm thick

The only thing I can do for you is making "even-smaller-stopper" part :-)
Now I have 2 types of "stopper" part. Whole holder will stay same sized.

Actually I managed to work out how to resize it in sketchup. I will be uploading a remix soon.

Ohh, in SketchUp? Bad idea really. You do not need to do that, I have the sources, so my export will be always better than from SketchUp. Which part have you modified?

base.stl and slide.stl

I made them each about 20mm shorter. They printed fine and I am using them.

Hello! Where is the base part? The part what i must put on in my controller. On the ninth picture I saw holder (to the left) and controller with base part (to the right). But I can't found STL file with them.

Any chance for a version that is slightly smaller? The tablet I am looking to put in this is 109mm

Check it out! ;-)

Hello, I try to find some way to satisfy - stay tuned ;-)

Could not be any Better , Fit like a glove , Thanks for all your help ,

Thanks! You are welcome ;-)

Hi My Friend , I did print that out and it came out a bit to big , The inside flat area were the iPad sits came out 27.67mm ( 1.099" ) , I only need it to be 17mm ( 5/8" ) That would be great , Thanks

Hello, sorry, I thought that you meaned actual size + 17mm, not 17mm finally :-)
I edited it and now it is as you need - try and confirm ;-)

Your the Man , Thanks , I'll print and let you know , Thanks

Gee has it been four days , I got called away so I just printed and that came out great , Thanks ,
I do have one more thing that I forgot , I have an iPad mini with a case on it , ( Its an otter box , ) the case is 1/2-5/8" Thick , any chance you could make the stops on the inside about 5/8" or 16/17 mm wide , ?? Hate to be out there and have to take the case on and off all the time , Hate to be a pain in the butt , I'd try but you seam to know exactly what's going on here , well of course you did one heck of a job on this ,Let me know Thanks ,

Comments deleted.

Hello! I have just uploaded second option "stopper_wide.STL". Give me know if it is suitable for your iPad mini in Otterbox now ;-)
If you will need it wider, I will edit it more.

I print and let you know for sure , Thanks Again

Its done! Happy printing and save flying! Give me know your experiences if you like to.

That would be great Thanks

Hello! No problem, give me max. 2 days, I will edit the holder so it can fit iPad mini too ;-)
So you dont need to remix it. I will do it as I know how and fast.

I did print this it's great but I have an iPad mini , I know 3/8" would do it but I guess a 1/2" would be perfect , Let me know Thanks

What's the chance of you remixing this so it fits an iPad mini , All it would need is for it to close 3/8 smaller , >??/ Thanks