Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Sue3DDesigns

Ramps 1.4 housing ATX backplate

by Sue3DDesigns Dec 24, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

It would be perfect if it had a slot for a six-pin connector as well.

Hi AbuMaia,

I did not do a 6-pin version as I do not have a locking plug to measure. If you (or someone else) has one available, and could measure the width of the hole accurately with a pair of calipers, I can upload an edited version for you.
[Don't make allowances for clearance, I'll do that. The exact width please. :) ]

I'm pretty sure I can get it close, even if you cannot. You might need to just relieve the hole slightly if too tight.

Please let me know what you want.

Best Wishes,
Susi.

I don't have any of the cables yet. I'm still in the process of planning out my printer enclosure. This plate will go on the back wall of the enclosure, connecting the printer to the electronics on the outside. 24-pin will connect the motors, one 8 pin for the heaters and thermistors, another 8 pin for fans and switches, and the 6 pin for a BLTouch.

For the 6 pin PCI-E, a 6 pin Molex mini-fit jr should work, and it has the locking tabs. I have one ordered at the following link that i'm going to try.
http://www.ebay.com/itm/6-Circuit-Wire-Connector-2-Complete-Molex-conn-w-Pins-Mini-Fit-Jr-/222501745344?hash=item33ce2332c0:g:3~wAAOSwPhdU0n3c

edit: received it, works great! 6-pin PCIE from PSU plugs right in.