Give your Tronxy X3 printer a lift by adding these shapely legs. Lifts it high enough (80mm) to have the control box fit under it.
Not a perfect solution, but it's good enough.
UPDATE: Added per request an even taller one. This elevates the printer 115mms from the very bottom.
3 perimeters or shells. Use a brim if your parts do not stick well to your bed.
M3 and M4 versions only changes the hole size.
About 7h35m for a set.
To attach, you need 8 total (2 per leg) 8-12mm M3 or M4 screws with same size drop in T-nuts.