This is a 2D model of Homer Simpson eating a doughnut. It is a 3D model of the picture below made using Solidworks.
Project 3: 2-D Art
Problem Statement: With a partner, you will design a “2D” placard using Solidworks. You and your partner will have the same design which meets the constraints below, and you will EACH use Solidworks to create your design.
No error messages
Part should be CENTERED about the origin
Demonstrate efficient use of construction lines
Demonstrate efficient use of automatic and manual relations
Demonstrate efficient use of Smart Dimensions
You and your partner should develop an agreed upon plan for recreating your figure:
Each person will draw a 1x scale front view of your design:
Each person’s drawing will contain ALL dimensions and reference lines used.
A bulleted/numbered list of the order you will create your sketch to be updated as you work through completing your design.
This plan MUST be approved before you begin making your figure in Solidworks.
Once you begin creating your models, you and your partner MUST work together, staying at the same pace. DO NOT move on to the next step of your plan until you’ve checked in with your partner and you are BOTH ready to proceed to the next step.
Each person should submit their completed Solidworks file at the end of the project.