MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
This is an enclosure for a Raspberry Pi model 3B and 4 channel relay board. It includes 4 standard US plug sockets, Off switch, and a standard computer cord socket. This was created to cleanup my setup. Currently using OctoPi to control my Monoprice Maker Select IIIP. I am using the relay board to turn on/off the printer as well as the lights through the octopi interface. Instructions included by JeffeB3 here: http://www.thingiverse.com/thing:1428478
Since I do not often need access to the Pi, I decided to stack the relay board on top of it. This reduced the space requirements but you will need to remember to plug in your gpio pin jumpers before installing the relay board on top of it. Enclosure was designed to use parts I already had on hand for another project. The rocker switch is only rated for 10amps so be sure not to plug any high powered devices into the outlets. I am currently only using 2 of the 4 channels on the board.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.