Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Roekels

DJI Osmo Mobile Stand

by Roekels Dec 7, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Printed V2 in PLA @0.2mm layer height. Worked perfect with 100mm/s speed! Thanks for sharing, I will post my make later.

Finally printed out V2 (@ 0.2mm), works great! Thanks

Does it scratches the osmo handle?

hello. i do it for osmo plus 2 and it work.
but, i want to insert title in the item. i can't open STL file by solid body.
so, can you sent to me the solidwork file design. my email: nguyendinhgiapgt93@gmail.com
thanks you so much!

Hello.
I do it for Osmo Mobile 2 and it works!
Thank you so much.

What are you printing this in? PLA, ABS?

PLA mainly. Without a heated chamber, you may need to upscale by 0.05 or so for a good fit.

Could you make the base a little thicker to accept a 1/4-20 thread insert? That way you could mount a quick release camera plate to the bottom and throw it on a tripod. I was thinking something like this... https://www.mcmaster.com/#93365a162/=1651reh

I've updated the page, there should be a v2 stl. I used the measurements from the link you provided, the design had to be dramatically altered but the insert is there, will use more material due to the raise in z height. However if it works then let me know!