This is just the files exported to STL from http://www.thingiverse.com/thing:194551
As a note, after printing the parts and comparing assemblies some of the part names are incorrect based on functions. For example, the part labeled lightsensorbrkt1 and 2 are actually servo mounts for the feeder or belt advancer servo. Machine pins, is actually the chain pins, not sure where the others go yet. Short link is the servo hold downs on the sorting table part. Long link is the servo side of the ratcheting belt advance. The servo X bracket is a stirring device along with the triangle bracket for the funnel feeder. There seems to be a missing bracket for the color sensor.
I cannot take any credit for the design, I simply exported the parts to make this easier for folks to print. Hoping that the code is released for this before I get mine printed.
Hey guys, the source code is released over here http://www.eevblog.com/forum/projects/my-nonstop-skittles-sorting-machine/15/ in the latest post.
Here is preliminary details:
You need 2 standard servos and 4 of the common 9g mini servos. You'll need minimally 5 and maybe 6 M3-50mm screws (these are the hardest to find). Everything else is M3x12s, 16s, 20s, and like 6 or 7 35-40mm long.
The chain is exactly 23 segments long.
You'll print 4 of the long track guides and 2 sets of the C ends.
I've since made plates of the chain segments to print 10 at a time which I can upload later today. I also made a plate with 24 of the chain pins for an easy print.
I didn't design this so I don't have full instructions or the code yet either. Just trying to post what I know in the mean time so you can begin to source parts and begin printing. Mine took me 2 days.