MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


dasaki ramps remix

by shawdreamer Dec 6, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Thanks for the good design. I have 2 questions and hope you can help me?
1) Is you design based on V1 or V2 of Dasaki's model?
2) How could I fix this on a 2020 frame?

1) tbh Im not sure, I didnt pay much attention to the version when I remixed it and its been a fair while since I did I probably wouldnt remember anyway lol
2) the same way I fixed it to the 15x15 alu square tube I used, just instead of bolting into alu tube you bolt it into extrusion t-nuts (Im assuming you meant 2020 extrusion obviously)

wow, thank you so very much for such a quick turn. Can you please post a picture of how you bolt it? Yes, I am using 2020, but my limited imagination could help me to figure it out (which hole to use for M3 T nuts?). Thanks again.

sorry I no longer have the printer I used it on but there are a couple of pictures on the "thingie" you could possibly use for reference.

the printer it was used on was more or less a testbed for further designs so it was eventually stripped down and rebuilt into a 2020 frame printer and I used another design of my own for the ramps housing (not cos the dasaki one wasnt usable but just to better match the new design)

Poltur XL upgrade parts
PolTur XL v.2 (The lack table printer)

np, sorry I couldnt be of more help

I like this design and I have printed it and would like to add the voltmeter but can't find something that fits. Do you remember where you got it or have a ink to it?

Ill dig out the ebay Link from my history in a few minutes but their pretty common things now and I often see them all over ebay aswell as Banggood, Gearbest etc etc.....


the listing I originally used is no longer available but the above one has the same dimensions but has mounting holes rather than a single long pcb but that shouldnt effect the fit and how its mounted in the remix design.

Thanks for the info. I went ahead and ordered one. If it fits that's great if not I can fill the hole if I have to.

I really like this case but when I tried slicing it, it tries to put a thin layer of material over the grated portion on the top cover.

thats odd, Ill have a look at the original remix design STL and see if there's some weird artefact thats wormed its way in during upload, if I find anything Ill upload a newer version just to be on the safe side

couldnt find any issue with the original uploaded part but just to make sure Ive removed it and replaced it with the most up-to-date verion I have.

hope that helps