MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Tablet / Phone Stand

by muzz64 Nov 18, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Very minimal, very like

Definitely my favorite phone stand here. Simple, easy-to-print, and elegant.

Hi, I need 16mm... do you can make it ?

Would it be right to remix this model and, keep it for myself( don't publish it) Muzz?

Yes for sure as long as it's for your own use and not published as you have noted.

All the best

That's great! I didn't know that. And wanted to be sure.

Greet Raimon

Comments deleted.

Samsung Galaxy S9 w/ an Otterbox case and the 13mm stand. Didn't realize my case was thicker at the bottom then the other three sides. Shrug

Cranked it out at 100mm/sec and .25 layer thickness in ABS.

Lines are a bit rough because of my print settings, but functionally it's great.

Hi. for my Iphone 7 (7.1 mm) is better 11 mm or 12 like Iphone 7 plus (7,3 mm.)?

All you need to do is measure how thick your phone is (including) any cover you may have fitted) then print the file with a slot slightly wider. The instructions provided explain this.

I hope this helps....

Hey, do you mind creating a 23mm version? It looks amazing, but I'd need it for a powerbank to power my RasbPi from.

That would require a redesign from scratch and I'm also not sure that would be the best way to stand it up. I assume it's just a box so, if you want to stand it upright a base it clips into would seem the most practical way to hold it.

Okay, thanks

Will this work with a slim Spigen NeoHybrid phone case?

Unfortunately I'm not familiar with that phone and case but you only need to measure it then check against the measurements provided. There are several versions.

Ok thanks. I went with 12mm model and it fits my iphone 7 plus with Spigen NeoHybrid case beautifully. Great job!

After soooooo many different stands, and even ones i designed, i can tell you this is by far the best. Well done!!! I have gifted 5 to friends and have printed 5 for around the house/work. Again, fantastic job!

Thanks for the feedback... pleased you like it!

I am printing now but this appears to handle the 3 biggest issues people forget...

  1. Leans back far enough for sitting on the little table you get on a plane
  2. Not terribly "tippy" (wider than average stance)
    3.Hole big enough for a phone with a thin case

Well thought out!

Thanks... it is really simple but works great for me. I have one at home and one at work... hope you're happy with yours when it's finished printing.