My designed case for the MKS gen 2Z V1.2 board.
Case uses two 40mm fans to cooling.
What you need:
M3 thread tap (threads for bottom part)
4x M3x40 screws (for top part mounting)
My box top part is version 1, so that´s why it´s different than 3D-models on pictures and stl model. Stl model and pictures of 3D-models are the lastest versions.
These new version prints are on my things to do list.
When using this case with sunhokey prusa, you have to move and modify Z-axis endstop mounting plate.
I used sunhokey original endstop mounting plate and moved that on the other size of the frame. You also have to move the endstop screw about 12mm and replace screw with longer one. Original endstop screw plate have to also shorten.
All modification you can see on the pictures.
Optional: shorten the printer wires so they can fit in the case.
That gives nice and clean look to printer.
Added MKG gen 2Z V1.2 box for 3x40mm fans.STL if you want more efficient cooling with 3x40mm fans.