If you want the BOOL TOOL for OpenLOCK, please download it here http://www.printablescenery.com/product/open-lock/
NOTE 1: You need to use the 4.3 or 4.0 Clip. This is compatible with all OpenLOCK tiles and will work with the new S and I configurations. 4.3 clips are a slightly tighter fit and will pull the tiles very close togeather, If you want a slightly looser fit use the 4.0 clip
OpenLOCK System is an open source scenery locking system. OpenLOCK System will allow you to build interlocking scenery items, swap walls and floors, it connects 360 and will tessellate perfectly. It’s compatible with other scenery systems.
OpenLOCK is based on the 2 inch square Dungeon Tile
The purpose of releasing the OpenLOCK System as Creative Commons Public Licence is to encourage others to develop cross compatible scenery and to provide a convenient platform for the community. You can use the OpenLOCK System files to make your own tiles and distribute them under Creative Commons Attribution-NonCommercial CC BY-NC.
Creative Commons Attribution-NonCommercial 4.0 International Public License
If you want to use the OpenLOCK system commercially please email email@example.com to obtain an exception notice for the licence
Please attribute www.printablescenery.com when posting your versions of the tiles online
CHANGELOG - (Allways backwards compatible)
OpenLOCK 1.2 Tight Clip added for making more permanent scenery
OpenLOCK 2.0 added extra connection points and the base files have been cleaned.
OpenLOCk 3.1 set all object to align to corners
OpenLOCK 3.2 small repair to D tile
OpenLOCK 4.0 Clip has 1mm remove from corners to allow 4 clips to be attached to the I tile (1 inch) tile)
OpenLOCK 4.1 Clip now comes in two versions, please test to see which one works best for you (4.0 or 4.1). ALSO 6x6 tile has been added and alternate hole positions on the U tile and the E tile.
OpenLOCK 4.3 - The A Wall template has been included for size. The top locking system has also been included. 4.3 Clip and 4.0 clips were renamed in correct sequential order.
OpenLOCK 7.5 - Triplex tiles are now included in OpenLOCK Templates along with more new tiles.
The locking system will print with its own supports which are easy to break off.
REGARDING HEIGHT. When designing OPENLock Items the minimum floor height is 7mm, this is the height that the tiles are currently set to, this is to allow enough distance between the top of the locking hole and the bottom of the top layer for the printer. It's advisable that you increase the height when making floors (8mm to 11mm). Wall height can be any height, however, normal dungeon tiles are around 50.8mm and some Sci-Fi Scenery is 80mm. Make sure you don't alter the connecting holes or the contact surface.