Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

mbremer

GoPro Tripod

by mbremer Oct 13, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Made a top plate for a 1/4" Screwmount.
Not tested yet.

Edit 30.12.19:
Had to enlarge it a little. The screw fits snug inside the hole now and its not too long anymore. If you need raw file ask me.

Thanks for this! Works nice

Fit my Apeman camera's clip perfectly. Thanks.
laid flat using Cura, used 20% infill on legs but on the clip I used 50%. I used standard support settings.

Printsettings? Support?

Great design. I laid my legs flat using cura and they printed well.

Great
exactly what i needed
good design, printing is easy
used m3x30 screw with success as you can see on picture

Two of the three holes in the base work perfect for a 4-40, one on the other hand is larger. If all three were small it would be perfect...

Hello,
TIPOD_BASE_QUICKRLS.stl one hole = m4 in place m3

How do you get the legs to lie flat? Currently using Slic3r. Trying Cura next.

You don't. I printed them standing up, at the 45 degree angle. They came out perfect, and it's good they printed that way cause my printer was not big enough to print them any other way.

What type of screws were used?

I've only printed the base so far and had some M3x32mm in my fastener box, they fit great and protrude just a touch, M3x30 would be prefect.

Great design! But what's the size of the screws? Thanks

I've only printed the base so far and had some M3x32mm in my fastener box, they fit great and protrude just a touch, M3x30 would be prefect.