This is a real-life, usable Pokemon Berry Pot. The design is based on the berry pots introduced in Pokemon Heart Gold & Soul Silver.
You can grow actual plants in this berry pot; my print settings resulted in a watertight base, but if yours doesn't come out watertight, a little sealant (i.e.: Mod Podge) should do the job.
The clear cover is just the top of a 2-liter soda bottle. The inner diameter of the rim is about 4 1/4" (108mm), the same diameter as the bottle I used. If you use a different size bottle, adjust accordingly:
(your bottle diameter in mm) / 108mm = percent to scale model
Honeycomb infill. ~12 hour print time at 0.20mm resolution. Print upside down with supports for best results.