With this jet pack you can reach heights never once thought achievable. You can connect as many jet pack as your 3d printer can print! You can go with the classic single rocket or the modern dual rocket jet pack!
I'm currently printing the jet pack and will post images soon.
Quick update "Hollow" files have been added
•Reduce filament use by ~50%!
Print each piece. I printed at a layer height of .4 and a infill of 5%
My print actually failed because my 3d printer broke at this point, but I fixed it by glueing another peice cut at the height were the print failed when I fixed my 3d printer.
Glue the bottom of the rocket to the tank. ignore the hot glue lines, I did that to make the print hold together better. This is cleaned up and fixed later.
before glueing the top part thread a string/rope/straps. This will make it easier than Threading it when the pieces are together.
Don't Glue the two pieces yet. Again thread the straps to the bottom piece than Glue.
This is how it should look like together. (sorry about the orientation changes :( womp)
Connecting the Packs
After you adhere the parts you can glue on the connector and another jetpack if you like (be sure to use 2 straps for a single jet, and 1 strap on each pack for a double jet)
I used Aluminum Tape to add some strength and to fill and dents or holes. I later used
After sanding, Paint it with whatever color scheme you want I used a Silver and red and covered that with gloss finish. At this point you can also use any stickers or paint on any details.