Popular whisker biscuit style arrow rest made from cheap Chinese toothbrushes.
Cut the toothbrushes in half, attach to the printed part using hot glue. Attach the whole thing to your archery bow or sling using either hot glue or screws. Voila!
Can be used with 3D printed arrow fletchings:
and 3D printed compound PVC bow:
After much testing I would recommend these fletchings:
Do not use the "normal" silicone soft fletchings arrows with this arrow rest as these wiggle too much during the initial stages of flight and easily get bogged in the arrow rest.
Using heat gun you can form the handle angle to better fit your bow.
Use it on your own responsibility. The author doesn't guarantee it to be fit for any purpose whatsoever.