Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

DrLex

High-Tech Soda Can Cooler

by DrLex Sep 14, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

This thing works GREAT!
Perfect fit first try. Actually works very well, too.
Thanks for the fantastic design.

Printed black PLA at 0.2mm with CR-10s using 1.2mm top/bottom/walls, 20% cubic infill (irrelevant?), no skirt, no raft, no support.
Fit is perfect for US Mountain Dew 12oz can. Thing is noticably cooler.
Wife remarked that it needed a knurled exterior.

Doublecouter wall would be better by far!!

If you mean ‘double contour’, this should print with 2 contours if you print with 0.4 mm contour width.

This is ... genius

One issue I noticed, perhaps the bottom part needs to be a little thicker, right now it's like 2 layers thick? I can flex it with my finger. It hasn't broke yet, but it seem pretty flimsy. Adding some thickness to the bottom should help a lot.

The bottom is 0.8mm thick which means four 0.2mm layers. That should be strong enough unless you're printing this in some really flexible filament. I'll add some beefier models when I have the time.

The number of bottom layers is set in your slicer

im printing one right now i can be watched at https://www.twitch.tv/that3dcoop