A modification to the original extruder mount (https://www.thingiverse.com/thing:1066268) to allow for a BLTouch sensor. According to the design specs for the BLTouch, the base of this needs to be 8.3mm above the tip of the hotend. For reference my hotend measures 63mm from the top of the heatsink to the tip of the hotend. I've made a few other modifications to the extruder mount design
- Increased the filament guide path from the hobbled bolt to the heatsink
- Added provision for m3 nuts to the hotend clamp screws
- Added breakaway disks to the end to prevent warping when printed.
Added a 2.7mm spacer to allow for a different hotend tip length.
Need it printed out? Then try this guy out, he's a great guy ;)