Module bay door for the "Realacc RX5808 Pro Diversity Module
Since there was no door available for the when I ordered mine I immediately began to design my own. Now Realacc offers a injection molded door but in my opinion it is not quite pretty. I am still working on improvements and will release newer versions as soon as I am finished.
Fits in my HD2 goggles fine and should also fit the V3.
V1: Initial version, basic looks and easy to print, mostly to test the fit
V2: partly curved front to blend into the look of the goggles, no strong fixation in the bay
V2.4: some touchups, lager display cutout and snap in tabs to prevent the module from falling out, maybe sand down the corners of the nubs just a little bit because its really hard to get out otherway (just a few strokes with 450 grid).
Also added 2 additional versions with 2 holes instead of one big (you won't see the diversity LEDs underneath) one is with thick wall there (should be easier to print with some printers) the other one with a thin wall.
V2.5: Included a suggestion made by user Gc9n to feature a hole for a little buzzer. 9mm buzzers should fit nicely and with a little filing 9,6 should also. The front is left open on purpose so different length buzzers can be used
NOTE: If anyone has suggestions for improvements just post it in the comments, I can make them in the native SW format which is much easier and mostly nicer than adding something in STL.
Any suggestions for the BETA version for the Pro Plus module are welcome!
0,4 Nozzle is recommended (wall thickness)