MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
The V2 cab modified to fit the V3 frame.
If you have already printed the V2 cab, you can keep the top and battery holders.
If you also wish to use the V2 baseplate you will need to saw/cut a few pieces to make it go over the V3 gearbox.
2-4x M3x16-25 for mounting baseplate to frame
2-4x M3x16-25 for mounting cab to baseplate
4x M3x10-16 for mounting battery holder to baseplate
2x M3 or equivalent for mounting the on/off switch to baseplate
A couple of cable-ties for securing components to baseplate
Some rubber bands to secure battery against battery holder
2x5mm LED for headlights
Suitable resistor or driver for the above
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.