MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Velleman K8200 Printed Circuit Board Cover with Fan

by Mike01Hu Oct 20, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you for adding this design, just started the print and off to Maplin to pick up a 40mm fan when they open.

I don't know if the board design has changed (K8200) but the top hole is covered up by one of the thermistor plugs. I had to make the top hole a bit bigger with a dremel to fit the wires through.

where can i plug the fan on board .
thanks in advance

Hi, it might be a bit late as 6 months have passed, but if you look at the 18 or 20 pin header just above the connectors for the stop switches the bottom 2 pins on the right hand side are labelled 12V and GND, I haven't attached a fan yet, but I plan on doing so over the next couple of days.

Works perfectly thank you for uploading!

When I download the file(s) I only get the cover stl in the zip file. What am I doing wrong?

Try to download the individual files. The Cover and the base are separate. If you have trouble contact me again.

which fan do i need for this case? 40, 50, 60mm?

My fan has the 40mm footprint but is 38mm so I guess it's 40mm. It has the same dimensions as the one supplied with the K8200.