This is an xcarriage for the Toranado v2 possibaly v1 extruder. What I have on my printer is the all metal motor mounts and 8mm acme rods. I do not know if this will work with the stander wood mounts. On my 8in printer i had to flip the xcarriage to be able to make this part work. I WOULD RECOMMEND PRINTING A NEW MOUNTING FOR THE X SWITCH TO BE EXTENDED OUT TO THE RIGHT OF THE MACHINE. I have mine mounted on the left and it makes it hard to level the bed. I used m3x16 button head bolts to fit it on. I need to counter bore the holes on the back so it won't rub on the rails but if you tighten them Down enough you can get them to sink in enough to not have an issue but I will update the model so you won't have to do that.
Update: The file is fixed so you should have any issues if using button head bolts. i would recommend to flip the model so the recesses are up. if you cant or dont want to it should print just fine the over hang is not bad and itll be covered by the bolts. I have not printed this new one so if i could get some feedback that would be awesome!!!!
What ever your heart desires
made of pla I made the walls 1.2mil thick just because of the bolts being tighten down wont collapse the holes as easily