MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Cut the PVC pipe into four 2' sections (61cm)
Alternately, cut them into two 4' sections if you don't want to make the collapsible
Use ABS glue to attach the female couplers to two pieces and the two male couplers to the other two
Attach the beersbee toppers to the empty end of either the male or female sections (glue them on if the fit is loose)
If using rebar, cut the rebar in 12"/30cm pieces with an angled tip
Test fit the rebar spike and wrap a couple sections of electrical tape around it to provide a snug, but easily attachable fit
If using nail spikes, make two wraps of electrical tape similar to the rebar. However, you will need many more wraps to get a good fit to the inside of the PVC
Frisbee and beer not included. Please beersbee responsibly. ;)
More from Games
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving cfeniak a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.