MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


MPCNC 525 Makita Holder

by markdoll01 Jun 30, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Hola, alguien lo usó con el Makita 3700?

what screws you are using on the back? the upper two screws fit in, but there is no way to put in the other three screws on each side. i used shorter ones, but they are to short. 5mm longer ones i cant push through the holes.

I printed the untested version and it works :)

Hello markdoll01,

have you maybe tried out the version that screws direct on the rails? I have the same mounting solution on the old version of the CNC and looking for the same on the new one.

Good Day S7design,

I haven't printed it unfortunately and Edwardku never messaged me if it is working or not.

Do you have the cad files for this? I plan on using the Dewalt 611 for my MPCNC once I upgrade it and am in need of a good mount. How difficult would it be to modify it? Also, can it be made for the 23.5 ("C") version of the MPCNC?

Hi Dave,

I uploaded a .skp and .dxf file for you - hope it helps. Might not be that difficult to modify.

from where i can get that red colour carraige

Good day markdoll01
Than you very much
I didn't expect so quickly respond for my ask

Thank you for your design
Could you make another holder mounted directly to the rails without the tool mount
to put Makita as close as possible to the new updated centre
I will use MPCNC only as a router don't need universal mount
and the one piece holder will be better for rigid
I have no skills in design that's why I am asking you

Hello Edwardku,

have you tried out the part that connects direct to the rails? I have my makita mounted in the same way on the old version of the CNC and looking for a new mount for the new version

Good Day Edwardku,

I added a design as you requested. Please note that I have not tested this version and I will not print to test it in the near future. You are welcome to try it and I can make changes for you again but only as from mid January 2017 unfortunately.

I brought the tool a bit closer and hope it will not interfere with the bearings etc.