Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

berky93

Universal Filament Colorizer

by berky93 Jun 30, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Looks pretty cool, I printed one and will try it later.

Do you have one made for the bigger fatter sharpies ?? the ones with chisel tips

I am using a full size sharpie, and it seems like it would do better with a blunt tip, rather than the fine point. It printed quick and easy, there is certainly a delay between the top and bottom of the hot end. I would recommend pushing some filament through with it hot to get the color into the first layer, and to remove it after print. I will see how it does, and post pictures of results

You are absolutely right on both counts. If you leave the marker as-is the tip tends to wear to more flat after a print or two, but I also found that splitting the tip with a razor let's you sort of surround the filament a bit better by fitting the notch around it.

As for the other point, I definitely recommend coloring the filament before it goes in. Printing a brim, raft, or skirt first also helps prime the ink to ensure even coloring of your item.

Will the sharpie fumes from melting it be bad to breath in?

I've never experienced nor heard about side effects from this process but I imagine i could be somewhat akin to people who use markers as inhalants. That is, not great, but not immediately life-threatening. My suggestion would be to treat it similar to printing with a filament that might give off toxic fumes: print in a ventilated area, and you should be fine.

Will this pollute my hot-end or is it no worse than the pigment already in the filament?

I haven't had any issues in my tests but others using similar techniques have said that prolonged use can cause clogs. I would say just clean out your nozzle by printing without the markers every so often and you should be fine.

Tried my own remixed version of this with disappointing results although I did not use a sharpie I expected some kind of result now I only got a disappointing discolouration of the filament i ran through it. If you have had better results any tips are appreciated. I suppose I have the sharpie left to try but haw are your results looking?

It depends on what your issue is. I found that some colors of Sharpie markers work better than others. For instance, red seems to come out as more of a dull yellow but blue worked pretty well. I also find it helps to "prime" the marker by sliding the holder up the filament about an inch and then inserting the Sharpie and then sliding it back down to ensure ink is flowing well. I've heard of some people splitting the head of the marker with a razor so it has a groove for the filament to fit through, though I haven't tried this myself.

The problem is that here simply isn't enough pigment getting on the filament I even drilled a hole straight through a pen and pulled the filament through this covered it as much as is possible still the colour came out disappointing. Given this pen was red but i would have expected more.

That's interesting, I haven't experienced anything like that. Generally I find that if you can see a clear streak of color on the filament you'll get at least some noticeable tinting on the print. I would suggest perhaps trying another color or another brand of marker as there are definite differences in each type of pigment.

maybe at some point in the future at the moment however i have moved on to other projects.

Comments deleted.

Thanks for your response. I printed the thing earlier and will experiment with it later...if I can find a Sharpie in a color other than black! Just in case, I'll cover the open end with a bit of tape.

This is a great idea but...one question: Sharpies are notorious for drying out when left uncapped for even a short while. And this thing is open at the end. Do you recommend coloring a bunch of filament before printing, or coloring while printing? If the latter, how do you cover the end to keep the sharpie from drying out?

So far I haven't experienced any drying out from my markers. I believe this is because ink is constantly being pulled through the tip onto the filament. If you were to just leave the marker there when not printing I imagine it would dry out. However, I don't recommend that anyway as in my experience leaving a marker touching the filament in the same spot for an extended period of time makes it prone to breakage when it starts feeding. Your best bet for smooth, consistent operation is to insert the marker right at the start of the print. I either pause my print right as it starts or just quickly insert the marker during the initial bit of material my printer lays down before it starts printing the actual model. I also recommend using a raft simply to force a bit of extra extrusion time before the printer actually starts on your model. This ensures there is no undyed section at the base of your object.

Cool design, it's different. Thanks