I found myself running out of shelf space for my manga collection, so I decided to model this shelf to hold some excess manga.
For this design I used #10 screws for each hole. Please read the instructions in the other sections to ensure this prints properly.
If anyone has any recommendations on any changes to this design please tell me.
Since this is a tall print, I would not recommend ABS, since it has a tendency to crack with larger prints, in my experiences.
Ensure that the chamfered surface on the front of the is facing towards the direction that would make it easiest to remove from the print bed.
For this design I made clearance holes for #10 screws with counter-bores included. Please note that the holes still may need some additional sanding.
Other than the shelf I needed 4 studs for #10 screws and 4 #10 screws.