Featured on MyMiniFactory!
Also see The HIVE - Stackable Hex Drawers
The HIVE is a fully stackable version of these modular hex drawers
This is an extension of my Modular Wine Rack.
I noticed my wine rack could also make great stackable drawers.
The hex modules are 75 mm long and 75 mm wide.
More Modular Drawer Systems
Find me on:
I removed the stacking piece because it is a waste of filament compared to my HIVE drawers which interlock. If you need to stack in a honeycomb pattern I recommend you print the HIVE drawers instead.
Later in the day I uploaded the module with a back and the drawer with a separator.
I uploaded both the voronoi module and the voronoi module with a back. I also uploaded dual modules.
I uploaded the voronoi dual modules and the dual modules with a back.
I uploaded the module stacker. This addition makes for easier stacking.
I uploaded the wall mounting module with the tab. The tab is reversible so that the module can be mounted from the inside or the outside. I made a special module for mounting with tabs on the inside. It is 3mm taller than the others. I also included another drawer.
I uploaded a larger module and drawer. 100 mm in height and width.
Print modules at 102% to compensate for tolerances. If you print as is they will not fit due to expansion of material.