MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


K8200 0,3mm Nozzle

by Piinu Sep 30, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

Try to use some teflon band like in plumbing it should solve your leak problem.
Image http://www.renoveo.com/upload/154_200.JPGhttp://www.renoveo.com/upload/...

thats not a bad idea. it could work, but it needs to be heat resistant. but i think teflon is.
maybe i try it out in the next few weeks. i´ll let you know my results for sure.

Would it be possible to purchase such a nozzle from you?

well it would be possible but its many work and it didn´t work already correct. it was not thight enogh so some pla dripped out the side and thats not good. if i can solve that problem i´ll contact you

That would be lovely, thank you very much!

hi guys!
I tryed out the nozzle and it worked very well but i could not find the right settings for it,

and so athe prints were not as good as i expected. and one bad thing is the time.

with a 0,3mm nozzle all the pritns needed much more time like a little part with 0,5mm nozzle about 50 minutes,
and with the 0,3 mm nozzle about 85 minutes at the same layer hight.
make a long story short I mounted the 0,5mm nozzle and that work better for my opinion!

Yes pure logic.
It's why I'm thinking at bulding a second very small machine
to print small high resolution parts.