I present to you the first 3d printed Super Nintendo cartridge. Super Nintendo has always been my passion since I was a little boy and making this project was a dream come true. That’s why I want to share this with you, so others with the same passion can enjoy and personalize it to create new and wacky designs. Thank you for downloading and please leave a comment if you have any suggestions.
You can check and see an example of the print settings I used for both sides in the image I uploaded.
IMPORTANT: I highly recommend to print each side standing up. You will surely find problems joining both sides if you decide to print them facing down.
Now that you have both sides printed...
Remove the support carefully and if posible wear protective eye gear to avoid any damage to your eyes. To join both sides you are going to need 3 allen screws.
-1 (M3 x 12) This one goes in the back.
-2 (M3 x 8) These go in the front.
Now you can open an original Super Nintendo Cartidge and transfer the chip to your newly printed cartridge. (You might need to file down some interior edges to create a better fit)