MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


UDOO case

by GreenPixel Oct 7, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

I have the same issue as ="patola:disqus" href="http://disqus.com/Patola/Patola.
I have a quadcore udoo and the case is just too tight. When I am
finally able to squeeze everything in somewhat close the power input
does not line up.

It doesn't work. I printed your case and then tried to fit in my UDOO - the dimensions are exact, so there is no room for the dangling parts of the connectors. I tried reprinting it with 1% increase in size and it sort of squeezed into the case, but it almost broke. 2% increase might be ideal, but I already lost two cases and a good amount of filament.

I ran into the same problems trying to fit my Udoo dual. I was thinking about reprinting at 102%, but I think the design is flawed. The connector positions may vary from unit to unit, but between the protruding ports on the front and the switches sticking out on the side, it's impossible to angle the board in without damaging something. What it probably needs is the faceplate for the main connectors merged with the lid.
I do really like this designs lid, using the logo for venting (and the screen was a nice touch).

It's not my problem! I can only say that: instead of print 3 cases you could file the part more.
Anyway, my udoo inside would fit perfectly (I can just insert a photo for confirmation).
Your udoo is original?
Your printer is calibrated well?
P.S. I invite you to click on "I Made One" and post the pictures.
If you think that my project is not good, post one yourself, always remembering that it is licensed under "Creative Commons - Attribution - No Derivatives"

Done. I designed a new case yesterday. It is entirely my original work, but I did create a link back to your design because it was an inspiration.

I am trying. First and foremost, thank you for your design. I think I expressed myself badly, and that is because I was sort of frustrated after printing for the second time.
I increased the case a little and also thickened some divisions on the side with the most openings (since they are so thin, it was common for the printer nozzle to stumble on the part and make it collapse). I am thinking about separating this part with several holes from the rest and make it attachable. It would make much easier to insert UDOO in it.

Your license allows no derivatives? So I cannot post an improved version of your design?

Nice! Just a couple suggestions - for the ports in the front right corner on top, make those "knock outs" so if we don't use those ports they'll just be covered...

Also, what's the hole on the right side for?

the hole on the right side is for the webcam. wou can found all datais on http://www.udoo.comwww.udoo.com

And yet, you do not allow modifications to your case. This is very contrary to the whole idea of UDOO of being open-source. Your device is copiable and modifiable, your case isn't. And yet, I was only able to use it after I increase its size by 2% and thickened some divisions and cannot publish my fixes because your license forbids.