UPDATE: V4 has repaired support interface. This part is notably difficult to print. I will update it as I find issues. Only use support with the single side model!!!
I designed this for a clients server.
This part is designed to house two 2.5" drives in a single 3.5" bay standard.
IF NECESSARY, the mount holes can be hogged out carefully. The 3.5" holes are undersized to ensure self-threading.
I have included a single side option for those who wish to hang the drives by one side. This is safe if the system is immobilized. I would not recommend this option for machines that will be on train rides, thrown down mountainsides, or tagging along for skydiving trips.
This will be a fairly tight fitting part, designed to be printed with rigid material (PLA, ABS).
CAUTION: Some thermoplastics have high static discharge characteristics. It is up to YOU to assure that ESD does not cause an issue while installing.
0.2mm or numerically lower
Again, this will be a fairly tight fitting part, designed to be printed with rigid material (PLA, ABS). Supports are recommended to maintain tolerances ONLY FOR THE SINGLE SIDED MODEL! V3 (and up) has built in supports.