At the time mounting the electronics I had this thing: http://www.thingiverse.com/thing:821099 lying around and harvested from my yet non-existent oldie printer and I wanted to use it on my Play setup. It contains a back and front support for the SmartLCD controller. I wanted to attach it to my Play using the hinge back support. Couldn't find any way to attach it to the chassis without using the drill. So I designed this two pieces to attach the LCD support from above via the hinge, and press fit this two pieces to the right back of the chassis with two M4 nuts & bolts. This way I didn't have to drill, remember: think twice, drill once. The part that attaches to the hinge requires support. Let's see what's next... I take three months trying to get finished this project... Hey! Does anyone have a design to print out free time? Anyone? :-)
UPDATE (29-APR-2016):Increased height of the whole thing by 5mm to allow even better grip. HINT: Use a bit of foamy in the inner to avoid sliding.
UPDATE (28-APR-2016): Added a flange to get a better grip on press fit to the chassis.