Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Avooq

Waverack | Voss Bottle Racking System

by Avooq Apr 16, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Which VOSS bottles do I have to use for this one?
There are 250, 330, 375, 500, 800 and 850ml bottles...

Hi,

This racking system was designed for the 375ml bottles, but it can be up scaled or down scaled to suit other sizes.

Thanks, Avooq.

Do you happen to have the single item endcaps as a download; so a single end-cap and a single module/slot so you can "close off" the line of connected rack... overall the friction fit should be fine, but it would be interesting to see if one could design prebuilt notches to, for example, easily configure the shape in 15 degree increments and lock the shape.

I'm curious to see how this model scales; I think it might work well to hold ArmyPainter/Vallejo paint bottles; then include a module plug at the end to hold brushes. Depending on tolerances this could technically apply to any bottle diameter for cleaner organization... i.e. medicine bottles; spice bottles... although, mixing bottle diameter sizes might pose a small challenge and you'd have to modify the design a bit to allow interchange between different bottles/diameters.

Hi,

Some interesting thoughts here, we will introduce a single closed off connector so the rack can be finished.

Notches were thought of for this but it does make rearranging the rack more difficult - as it's currently designed one can easily manipulate the bottle by sliding them on the table surface to find the desired position. All these improvements might be something we add to the next model.

Thanks, Avooq.