FINALLY!!! A model that fits with stuff!
Had to redesign the whole AUG mag part, and a little of the M4 part! But now it is as close to a "Print and use" design as I can get it!
I will still come with improvements though! I still believe I can get it closer to a "perfect" adapter. But at least now you guys have something usable :-D
And thank all of you that have come with ideas and tips to improve the design! I have made some pretty cool friends after uploading the old files, which weren't really nothing more than Concept files, but people wanted to see it through!
It is designed with a ASG AUG A3 rifle, so if you have trouble with the fit with rifles from other manufactures, pm me or leave a comment and I will see what I can do.
Assembly is shown in the showcase video.
Link to the showcase video
You need a fairly large infill percentage for the screw inserts to hold on the "AUG part". Otherwise the screw might tear it away.
The AUG_part.stl and M4_part.stl needs some supports while the Lock.stl and Pin.stl does not.
M4_part.stl needs to have the lock mount supported, but try not to get the rectangular hole and the spring insert filled with supports.
Stuff you need!
You'll need some screws, and if you would like to make sure it sticks, you can glue the two main peices together.
2 x screws
optional : glue
Some bonus pictures!
I dug out all the print attempts and prototypes of this project, and thought it was fun you set them up side by side.