Prusa i3 derivative made from various designs found on Thingiverse.
Z Axis lead screws can either 5mm - 6mm threaded rod or 8mm x 2mm pitch lead screws.
Y Axis can have 8mm or 10mm smooth rods.
Extruder uses Nema 14 motor
This printer has been built with the standard 200mm x 200mm heated bed, 300mm x 200mm heated bed "landscape" and also 200mm x 300mm "portrait"
DXF files for the larger frame is included as well as the larger bed support with an option to use 3 or 4 linear bearings.
Please message me or leave a comment if you would like a more detailed explanation of any aspect of this printer.
Y Axis from Endlesshunt
Smooth rods are 8mm so a 8mm to 10mm adaptor was made.
X Axis from Toolson
Z Axis from Ooznest
Left motor mount modified to take endstop switch
Extruder from Clough42
Extruder body modified to allow it to bolted to the X carriage mounting bracket
Extruder cold end from Toolson
Mounting bracket modified to suit extruder body
Full Graphics LCD Case from modelatolyesi
A big thank you to all the above people for allowing me to make a custom printer.
Added missing Z Axis Frame Brace Bolt On file.