MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
This will let you mount a test indicator on your Huxley to REALLY level up the bed!
Press two M3 nuts into the hex sockets. Install two M3 screws, 12-14 mm long, into the nuts from the hole side. Install your test indicator onto the shaft; adjust it so the point is close to the extruder centerline. Install it onto the X carriage and proceed to do a precision alignment!
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving Weldingrod1 a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.