Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

cmar

Missile Beer Can Koozie

by cmar Mar 26, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

+1 on the 1% increase. Fun design though I love it! Anycubic i3 mega and its juuuuust barely too small. I'm going to mess with scaling it for thinner cans (redbull, coors etc...)

I made this and cans don't fit. should I scale up 1%

You could try scaling in the x and y by 1%

It's an exact fit so depending on your printer you might need a little extra room.

What filament is this? I love the color.

It was an older spool of eSun ABS Green.

This is cool.
Can you make one for beer bottles as well?

When I slice this it cuts off the bottom half and only shows the top. I don't have this issue with any other STLs

What slicer are you using? I was able to slice it with Cura.

S3D. What software did you use to make this?

Interesting! I just tried it in S3D and received the same error.

It was originally created in Fusion 360.

Could you try re-exporting it with a different triangle setting?

I just tried in Fusion 360's high and low triangles, both had bad results in S3D.

I'll have to investigate what's happening. I just uploaded the Fusion 360 file if you want to take a look.

Any sort of update on that?

I've uploaded a new file missile_koozie_v6.stl which slices correctly in Simplify3D.

The problem with this model is that there are 5 different bodies. If you want to print it with S3D select the body and then go to mesh-Separate connected surfaces. This will disconnect the 5 bodies. Then you can simply press prepare to print (remember not to center and arrange because it will move all the parts). Cheers

Thanks for your suggestion. I combined the bodies and missile_koozie_v6.stl slices correctly now.

Thanks for the tip, I'll see if I can combine the bodies in Fusion 360. Didn't realize that was causing the problem.